No, this set is made specifically for Shimano standard hose and shifters, and the pin and olive dimensions are not interchangeable with other brake brands. If you are working on SRAM, Magura or Tektro brakes, you will need pins and olives matched to that brand's specific hose fitting instead.

This set of 4 pins and 4 olives is sized for one full bicycle, covering both hoses on both the front and rear brakes, since each hose end needs its own pin and olive. If you are working on more than one bike, you will need an additional set for each.

Once a pin and olive have been pressed into a hose, they deform slightly to create the seal, so reusing them at a different hose length or after removal often leads to a weak or leaking connection. Using a fresh pin and olive from this set each time you cut or rejoin a hose is the safer, more reliable approach for something as important as your brakes.

You need a proper brake hose cutting and pressing tool, such as our Brake Hose Joining and Cutting Kit, to cleanly cut the hose and press the olive and pin in place squarely. Attempting this with improvised tools risks an uneven seal that can leak fluid or air into the system.

Since this is a small, low-cost consumable, it is a smart item to keep on hand if you own a Shimano-equipped bike, so you are ready whenever you need to trim a hose for a new handlebar setup or fix a leak without waiting on a fresh order.

Yes, these are genuine pins and olives sized for Shimano standard hose and shifters, sold through DoGoodCo and manufactured to create a secure, leak-free seal when pressed in correctly. If any part in your set appears defective, our support team will help arrange a replacement as per store policy.