The sleeve has an inner diameter of about 6mm and an outer diameter of about 14mm, making it suitable for outer cable housing or hydraulic hoses up to roughly 6mm in diameter, which covers most standard derailleur cable housing and brake hose setups. Check your specific housing or hose diameter against this before ordering if you have an unusual setup.

Slide the foam sleeve over the section of cable housing or brake hose that will pass through the frame's internal routing ports before threading it through the frame, so the foam sits along the length that would otherwise contact the frame's inner walls. Trim the sleeve to length as needed for your specific frame's internal routing path.

A common cause of frame rattle on bikes with internal cable or hose routing is the cable or hose knocking against the inside of the frame tubes as the bike moves, especially over rough Indian roads and potholes. Fitting a foam damper sleeve like this one around the internal cable or hose run is one of the most effective and inexpensive fixes for this specific type of rattle.

It can often be slid off and reused if it's still in good condition, though foam sleeves do compress and wear over time and with repeated cable changes, so it's worth inspecting the foam for tears or flattening before reusing it. Given the low cost, many riders simply fit a fresh piece whenever they do a cable or hose service.

This is a genuine LeBycle product available on DoGoodCo with GST included in the price, backed against manufacturing defects. Reach out to our support team if the roll arrives damaged or shorter than the stated length.

Orders are dispatched within 3 working days of confirmation, and since DoGoodCo ships across India, the total delivery time depends on your pin code and local courier serviceability. All orders are prepaid at checkout through secure payment options; cash on delivery is currently not available.