ROCKBROS Suction Cup Bike Rack for Car Roof Quick Release Vehicle Bicycle Racks (1 Bike Version)
- Regular price
- Rs. 15,700.00
- Sale price
- Rs. 15,700.00
- Regular price
-
Rs. 16,500.00
SKU:XP1001
You May be Interested
Tire widths of 2.5 inches and below are suitable for our roof racks.
( The multi-bike versions of the Rack do not necessarily mean that you must carry multiple bikes simultaneously. Each model is designed to securely hold just one bike if needed, providing flexibility based on your requirements. )
EASY INSTALLATION:With quick release fastener and synthetic rubber sucker, it is easy to fix your bikes on the car roof. The weight of our bike rack is between 2.1-4.5kg, it is portable to carry and install. And there is a installation video in the Picture 7, please follow the instructions or the installation video.
NOT DAMAGE YOUR CAR: Synthetic rubber suckers are sucked on the car roof, will not damage to the paint and sheet metal of your car, and the maximum load capacity of each bike on the car bike rack is 20kg. This bike carrier for car make travelling with your bikes come true.
STABILITY&SECURITY: The aluminum alloy body is sturdy enough to hold your bike. Vacuum pumping suction cups ensure firmness of the rack. And the crank is fixed with high-intensity hook and loop fasteners, which could prevent pedals from attriting roof of cars.
COMPATIBILITY: Roof top bike rack for one, two and three bikes, are suitable for most bicycles, and could be used for all almost vehicles like sedans, coupes, hatchbacks, SUV, vans, and more. Meets your need to transport your bikes during road trips or camping excursions.
LOW WIND-RESISTANCE: Cabinet and delicate rack shape could controll wind resistance, and also greatly lower the noise, let your driving environment be more comfortable.
STRONG SUCTION POWER & RELIABLE SAFETY：Each suction cup delivers up to 120 kg vertical and 140 kg horizontal pull strength, providing exceptional stability and holding force during transport. Rigorously tested under static load conditions to ensure durability and safety. Designed exclusively for carrying traditional human-powered bicycles—do not modify or use for e-bikes, electric bicycles, or any other motorized vehicles.
How to install the bike rack?
1. Clean up the car roof and the suction cups with a clean and wet towel.
2. Install front fork holders, then put the rack on the chosen location, press the suction cup vertically against the car roof with one hand while the other hand pushes the cylinder rod to extract the air until the white line is in the pump.
3. Remove the bike front wheel then lock the front fork on the roof rack.
4. Install the rear suction cup, then fix the rear wheel and the crank with hook and loop straps.
ROCKBROS Bike Carrier for 1 Bike / 2 Bikes / 3 Bikes
Bike rack for 1 bike
Bike rack for 2 bike
How to choose installation location?
The selected installation location must be flat and smooth. Do not install it on the advertising area or other seam.
Please hold the handlebar forward when attaching the bike to the roof rack.
When installing, the white plunger need to be pointed towards the back of your car.
Precautions when using ROCKBROS Suction Bike Rack:
1. The maximum load of one-bike rack is 20KG. The load-bearing capacity of the second-bike rack and third-bike rack is more than 20KG, but please consider the bearing capacity of your own car.
2. When used on sunroof or glass roof, pls DO NOT open the car sunroof when the rack is installed, and also it is necessary to confirm there are no cracks or small holes on the sunroof before installation.
3. Do not use the bike rack on the convertible top and roadster top car.
4. Before using, please check all the bolts are tightened.
5. Wipe the suction cup and car roof surface with a clean wet towel, prevent the roof rack from sliding due to accumulated water.
6. Make sure there is NO obvious sign of rebound from the cylinder rod.
7. Speed should be less than 120 Km/h when using the bike rack, and please check whether the bike rack still works normally every 2 hours.
8. After using, please cover up the suction cups.
9. There is a video of how to install the front fork on the bike rack in Figure 7, pls watch it carefully to confirm that your bike fronf fork is installed correctly.
INSTALLATION WITH SUCTION CUPS
You can easily install the roof rack by pressing on the cylinder rod until you can no longer see the white line.
SUITABLE FOR MTB AND ROAD BIKE
The rear rubber suction cup is equipped with two arches that are suitable for different tire sizes.
HIGH QUALITY ALUMINUM ALLOY
The main body is made of a high-strength aluminum alloy that is not easily deformed or rusted.
COVER FOR SUCTION CUPS
When you are not using it, you can simply downgrade it. The dust cover can protect the suction cup well.
This product is non-returnable and does not have any exchange policy.